N2000H V3 Appliance
User Guide
4 Configuring the N2000H V3
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 4-16 Security
14. Select Set Supervisor Password, and press Enter. Set a login password for the super
administrator.
Before changing the supervisor password, you need to enter the current supervisor
password. The Appliance is locked after three consecutive failures with wrong passwords.
Restart the Appliance to unlock it.
The supervisor password must be a string of 8 to 16 characters, including special characters
(including spaces) and at least two types of the following characters: uppercase letters, lowercase
letters, and digits.
A new password cannot be the same as one of the previous five passwords.
After the supervisor password is set, the following menu items are displayed:
Clear Supervisor Password
Power on Password
----End
4.5 Changing an iBMC User Password
This topic describes how to change an iBMC user password.
Scenarios
Change an iBMC user password for the Appliance.
To Next Page
Loading...
Need help?
General