Huawei N2000H V3 - 2.4.5 Connecting a Serial Cable

N2000H V3 Appliance
User Guide
2 Installing and Removing the N2000H V3
Issue 04 (2018-11-06)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
55
Figure 2-23 Connecting a USB device
----End
2.4.5 Connecting a Serial Cable
Scenarios
The Appliance provides one standard DB9 serial port on the rear, which works as the system
serial port by default. You can set it to the iBMC serial port on the iBMC CLI.

As the system serial port: It is used for monitoring the operating system (OS) status.

As the iBMC serial port: It is used for debugging and locating a fault.
Prerequisites
Conditions
No special condition is required for this operation.
Data
You have determined the rack number and installation position for the device to be connected.
Tools
Electrostatic discharge (ESD) wrist strap or ESD gloves: used to prevent ESD damage.