N2000H V3 Appliance
User Guide
4 Configuring the N2000H V3
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuring the N2000H V3
About This Chapter
This topic describes how to configure the N2000H V3 after installation.
4.1 Configuration Overview
This topic describes the default information and the initial configuration process.
4.2 Checking the N2000H V3
This topic describes how to check the N2000H V3 initial status.
4.3 Configuring RAID Properties
This topic describes how to configure RAID properties.
4.4 Configuring the BIOS
This topic describes how to configure the basic input/output system (BIOS) for the N2000H
V3.
4.5 Changing an iBMC User Password
This topic describes how to change an iBMC user password.
4.6 Installing an OS
This topic describes how to install an operating system (OS) for the N2000H V3.
4.1 Configuration Overview
This topic describes the default information and the initial configuration process.
4.1.1 Default Information
This topic describes the default information used for configuring the Appliance.
Table 4-1 lists the default user name, password, and IP address used for configuring the
Appliance.
To Next Page
Loading...
Need help?
General