N2000H V3 Appliance
User Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
You have located the N2000H V3 based on the preceding information, and labeled its
panel to prevent misoperations.
Tools
ESD wrist strap or ESD gloves
Procedure
Step 1 Pull upwards the right end of the system battery and remove it from the slot. See step (1) in
Figure 5-37.
Figure 7-37 Removing a system battery
Step 2 Place the removed system battery in an ESD bag.
----End
7.21 Installing a System Battery
This topic describes how to install a system battery.
Scenarios
A system battery fails.
A system battery is low.
To Next Page
Loading...
