N2000H V3 Appliance
User Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Prerequisites
Conditions
You have powered off the N2000H V3. For details, see 3.2 Powering Off.
You have removed the chassis cover from the N2000H V3. For details, see 5.6
Removing the Chassis Cover.
Data
You have obtained the rack number and chassis number of the N2000H V3.
You have located the N2000H V3 based on the preceding information, and labeled its panel to
prevent misoperations.
Tools
ESD wrist strap or ESD gloves
Procedure
Step 1 Take the spare system battery out of the ESD bag.
Step 2 Hold the system battery with the side marked with text facing upwards, insert the left end of
the system battery into the slot, and gently press down the system battery until it is properly
installed in the slot. See Figure 5-38.
Figure 7-38 Installing a system battery
To Next Page
Loading...
