Huawei N2000H V3 - 9.2 Logging In to the iBMC WebUI

N2000H V3 Appliance
User Guide
9 Common Operations
Issue 04 (2018-11-06)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
250
Figure 9-3 Setting the IPv4 address of the iBMC management network port
Step 5 Set the parameter in IPV4 configuration and IPV6 Configuration for the iBMC
management network port in the same way.
Step 6 Press F10 to save settings and exit.
----End
9.2 Logging In to the iBMC WebUI
This topic describes how to log in to the iBMC WebUI.
Scenarios
Use the WebUI to quickly and easily monitor, manage, and configure devices.
Log in to the iBMC WebUI.
Prerequisites
Conditions
No special condition is required for this operation.
Data
The following data is available:

You have obtained the IP address for the iBMC management network port.