Huawei N2000H V3 - 7.2 Hard Disk Procedures

N2000H V3 Appliance
User Guide
7 Replacing Parts
Issue 04 (2018-11-06)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
136
7.2 Removing a Hard Disk
This topic describes how to remove a hard disk when replacing it with a new one.
Scenarios
Remove a hard disk in any of the following scenarios:

A hard disk fails.

A hard disk is to be replaced with a new model.

A hard disk has no free space.
Do not power off the N2000H V3 when removing a hard disk.
Prerequisites
Conditions
If services are running on the N2000H V3, you have backed up the data on the hard disk to be
removed and delete RAID configuration from the hard disk.
Data

You have determined the position on the N2000H V3 for removing a hard disk.

You have obtained the rack number and chassis number of the N2000H V3.

You have located the N2000H V3 based on the preceding information, and labeled its
panel to prevent misoperations.
Tools

ESD gloves or ESD wrist strap

Packaging materials, for example, an ESD bag
Procedure
Step 1 Determine the position of the hard disk to be removed(for example,a front hard disk)on the
N2000H V3.See Figure 5-1.