N2000H V3 Appliance
User Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 7-39 Position of a RAID controller card
Step 2 Hold down the latches on the cables to the RAID controller card, and remove the cables from
the RAID controller card. For details, see 1.7 Internal Cabling.
Step 3 Unscrew the RAID controller card. See step (1) in Figure 5-40.
Step 4 Lift the RAID controller card slowly out of the Appliance. See step (2) in Figure 5-40.
To Next Page
Loading...
