N2000H V3 Appliance
User Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Scenarios
Install a fan module to replace the original one.
Prerequisites
Conditions
You have removed the chassis cover from the N2000H V3. For details, see 5.6
Removing the Chassis Cover.
Data
You have determined the position on the N2000H V3 for installing a fan module.
You have obtained the rack number and chassis number of the N2000H V3, and labeled
its panel to prevent misoperations.
Tools
ESD gloves
Packaging materials, for example, an ESD bag
Hardware
You have obtained a spare fan module.
Procedure
Step 1 Take the spare fan module out of the ESD bag.
Step 2 Insert the fan module along the guide rails into the slot. Check that the fan cable connector is
securely inserted into the mainboard connector. See Figure 5-22.
To Next Page
Loading...
