N2000H V3 Appliance
User Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 7-42 Position of a RAID controller card
Step 4 Align the connector on the RAID controller card with the port on the mainboard, and insert
the RAID controller card slowly into the mainboard. See step (1) in Figure 5-43.
Step 5 Screw the RAID controller card. See step (2) in Figure 5-43.
Step 6 Connect cables to the RAID controller card. For details, see 1.7 Internal Cabling.
To Next Page