Huawei N2000H V3 - 8.4 Clearing an Alarm

N2000H V3 Appliance
User Guide
7 Replacing Parts
Issue 04 (2018-11-06)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
234
Data

You have determined the position on the N2000H V3 for removing the front mounting
ear plate.

You have obtained the rack number, chassis number, and slot number of the N2000H V3,
and labeled its panel to prevent misoperations.

You have located the N2000H V3 based on the preceding information, and labeled its
panel to prevent misoperations.
Tools

ESD wrist strap or ESD gloves

Packaging materials, for example, an ESD bag

Phillips screwdriver
Procedure
Step 1 Loosen the screws that secure the front mounting ear to the N2000H V3. See step (1) in
Figure 5-88.
Step 2 Pull out the front mounting ear in the arrow direction. See step (2) in Figure 5-88.
Step 3 Loosen the screws on the front mounting ear. See step (3) in Figure 5-88.
Step 4 Remove the front mounting ear in the arrow direction. See step (4) in Figure 5-88.