N2000H V3 Appliance
User Guide
2 Installing and Removing the N2000H V3
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 2-16 Securing a Appliance
Step 3 Install a cabling rack.
1. Insert the support lever into the outer rails on both left and right sides. See step (1) in
Figure 2-17.
2. Insert the nail heads on the left outer rail into the holes in the outer support lever of the
cabling rack, and pull the cabling rack out to secure it. See step (2) in Figure 2-17.
3. Insert the nail heads on the left inner rail into the holes in the inner support lever of the
cabling rack, and pull the cabling rack out to secure it. See step (3) in Figure 2-17.
To Next Page
Loading...
