EasyManuals Logo
Home>Huawei>Network Router>NetEngine40E

Huawei NetEngine40E Hardware Description

Huawei NetEngine40E
770 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #340 background imageLoading...
Page #340 background image
HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
6 Boards
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
326
Product Specifications
Table 6-236 lists the product specifications of the 5-Port 10GBase LAN/WAN-SFP+ Line
Processing Unit S.
Table 6-236 Product specifications of the 5-Port 10GBase LAN/WAN-SFP+ Line Processing Unit
S
Item
Specifications
Supported protocol
and service
Ethernet_II, Ethernet_SAP, Ethernet_SNAP
PTP
Interface type
SFP+
Reliability and
availability
Supporting hot swap
NMS
Enhanced command-line interface
SNMP and MIB support
Operating
conditions
Long-term ambient temperature: 0°C to 45°C
Short-term ambient temperature: -5°C to +55°C
Long-term relative humidity: 5% to 85%
Short-term relative humidity: 0% to 95%
Storage conditions
Storage temperature: -40°C to +70°C
Storage humidity: 0% to 95%
6.14.2 4-Port 10GBase LAN/WAN-SFP+ Line Processing Unit
S(LPUS-51)
Overview
Either the LAN or WAN mode can be configured for each interface on the 4-Port 10GBase
LAN/WAN-SFP+ Line Processing Unit S(LPUS-51). HQoS is not supported on this board.
Figure 6-90 shows the appearance of the 4-Port 10GBase LAN/WAN-SFP+ Line Processing
Unit S(LPUS-51).
Figure 6-90 Appearance of the 4-Port 10GBase LAN/WAN-SFP+ Line Processing Unit S

Table of Contents

Other manuals for Huawei NetEngine40E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei NetEngine40E and is the answer not in the manual?

Huawei NetEngine40E Specifications

General IconGeneral
BrandHuawei
ModelNetEngine40E
CategoryNetwork Router
LanguageEnglish

Related product manuals