Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
6 Boards
Issue 01 (2012-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
494
Table 6-498 Product specifications of the 40-Port 10/100/1000Base-RJ45 Line Processing Unit S.
Item
Specifications
Supported protocol
and service
IP
Interface type
Electrical interface: RJ45
Reliability and
availability
Hardware feature

Supporting hot swap
NMS
Enhanced command-line interface
SNMP and MIB support
Operating
conditions
Long-term ambient temperature: 0°C to 45°C ( 32°F to 113°F )
Short-term ambient temperature- -5°C to +55°C ( 23°F to 131°F )
Long-term relative humidity: 5% to 85%
Short-term relative humidity: 0% to 95%
Storage conditions
Storage temperatu-e: -40°C to +70°C ( -40°F to 158°F )
Storage humidity: 0% to 95%
6.22 Flexible Card Line Processing
Unit(LPUF-21-A/LPUF-21-B/LPUF-21-E,2 sub-slots)
This chapter describes the structure and specifications of the LPUF-21.
Overview
The LPUF-21 has three models:LPUF-21-A,LPUF-21-B and LPUF-21-E.
The LPUF-21-A supports L3VPN whereas the LPUF-21-B supports all software features
except L3VPN, MVPN, and IPv6 and the LPUF-21-E supports PPPoE and IPoE.
The LPUF-21 provides two slots, each of which can hold one half-width FPIC.After removing
the slide rails between the two slots on the LPUF-21, you can insert a full-width FPIC into the
slot.
Figure 6-174 shows the appearance of the LPUF-21.

Huawei NetEngine40E Specifications

General

Brand	Huawei
Model	NetEngine40E
Category	Network Router
Language	English