Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
6 Boards
Issue 01 (2012-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
471
Item
Specifications

PIM SSM

AutoRP
Interface type
48-port FE/GE-SFP
Reliability and
availability
Software features:

NSF

FRR
Hardware features:

Supporting hot swap
NMS
Enhanced command-line interface
Craft Works Interface (CWI)
SNMP and MIB support
Operating
conditions
Long-term ambient temperature: 0°C to 45°C ( 32°F to 113°F )
Short-term ambient temperature: -5°C to +55°C ( 23°F to 131°F )
Long-term relative humidity: 5% to 85%
Short-term relative humidity: 0% to 95%
Storage conditions
Storage temperature: -40°C to +70°C ( -40°F to 158°F )
Storage humidity: 0% to 95%
6.19.4 2-Port 10GBase LAN/WAN-XFP+24-Port
100/1000Base-X-SFP Line Processing Unit S(LPUS-41)
The right-most twenty-four ports are numbered in the format of "slot number/0/port number" and the
left-most two ports are numbered in the format of "slot number/1/port number".
Overview
Figure 6-165 shows 2-Port 10GBase LAN/WAN-XFP+24-Port 100/1000Base-X-SFP Line
Processing Unit S. 1588v2 and HQoS are not supported on this board.
The twenty-four 100/1000Base interfaces can be installed with the following optical modules:

Provides GE optical modules.

Provides GE optical modules.

Provides electrical interface SFP modules, supporting features of the 1000M electrical
interfaces.

Supports intermixing of the preceding modules.

Huawei NetEngine40E Specifications

General

Brand	Huawei
Model	NetEngine40E
Category	Network Router
Language	English