Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
6 Boards
Issue 01 (2012-09-30)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
380
Table 6-318 Product specifications of the 8-Port Channelized OC-3c/STM-1c POS-SFP Flexible
Card.
Item
Specifications
Supported protocol
and service
PPP or HDLC
Interface type
SFP
Reliability and
availability
Hardware feature

Supporting hot swap
NMS
Enhanced command-line interface
SNMP and MIB support
Operating
conditions
Long-term ambient temperature: 0°C to 45°C ( 32°F to 113°F )
Short-term ambient temperature: -5°C to +55°C ( 23°F to 131°F )
Long-term relative humidity: 5% to 85%
Short-term relative humidity: 0% to 95%
Storage conditions
Storage temperature: -40°C to +70°C ( -40°F to 158°F )
Storage humidity: 0% to 95%
6.16 Flexible Card Line Processing
Unit(LPUF-40-A/LPUF-40-B/LPUF-40-E,2 sub-slots)
This chapter describes the structure and specifications of the Flexible Card Line Processing
Unit(LPUF-40,2 sub-slots) and FPIC.
Overview
The Flexible Card Line Processing Unit LPUF-40 provides two slots, each of which can hold
an FPIC that supports hot swapping. The cards support hot swap. The LPUF-40 supports a
maximum of 40-Gbit/s bandwidth.
The LPUF-40 has three models: LPUF-40-A,LPUF-40-B and LPUF-40-B. The LPUF-40-A
supports L3VPN whereas the LPUF-40-B supports software features except L3VPN, MVPN,
and IPv6. The LPUF-40-B can be upgraded to support the features of the LPUF-40-A
through licenses.The LPUF-40-E supports PPPoE and IPoE.
Figure 6-124 shows the appearance of the LPUF-40-A.

Huawei NetEngine40E Specifications

General

Brand	Huawei
Model	NetEngine40E
Category	Network Router
Language	English