Huawei UPS5000-E Series - Page 160

UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
4 User Interface
Issue 11 (2019-12-20)
Copyright © Huawei Technologies Co., Ltd.
150
Item
Description
Default Value
Value Range
communication, ensure that the
parity modes for the device nodes
are set to the same mode.
Stop bit
Stop bit in the Modbus
communication frame format.
When the UPS is connected over
the serial port Modbus, set this
parameter based on the frame
format that the upstream device
Modbus supports.
1
1–2
Figure 4-15 Modbus TCP settings
Item
Description
Default Value
Value Range
ModbusTCP
encryption
If Modbus TCP is used for
communication, communication
links do not implement
encryption or implement
encryption based on the selected
encryption mode.
Enable
Disable, Enable