Huawei UPS5000-E Series - Page 172

UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
4 User Interface
Issue 11 (2019-12-20)
Copyright © Huawei Technologies Co., Ltd.
162
iBOX Settings
Figure 4-29 iBOX Settings
On the System Info > Settings > iBOX Settings > Basic Param. screen, if the Number of iBOXs is
not 0 the Batt. String Config is displayed on the iBOX Settings screen.
Figure 4-30 Basic Param.
Item
Description
Default Value
Value Range
Number of
iBOXs
The number of iBOXs connected
to UPS.
0
0–4
iBOX start
address
Communication address of the
iBOX when the UPS queries
iBOX data.
60
N/A
iBOX number
of iBATs
Specifies the number of iBATs
managed by the iBOX.
0
0–300
iBOX logical
start addr
Specifies the communication
address when the northbound
device queries iBOX data.
0
0–124