Huawei UPS5000-E Series - Page 216

UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
4 User Interface
Issue 11 (2019-12-20)
Copyright © Huawei Technologies Co., Ltd.
206
Figure 4-64 Event configuration page
Number of jobs = Number of RCCMD Shutdown jobs + Number of RCCMD Message jobs + Number
of RCCMD Execute jobs + Number of RCCMD TRAP jobs.
Table 4-24 Buttons on the event configuration page
No.
Name
Description
1
Button for expanding all
You can view all jobs of all events by
clicking this button.
2
Button for expanding one event
You can view all jobs of the event by
clicking this button.
3
Button for adding one job
You can add one job for the event by
clicking this button.
4
Button for adding one job for
events
Select multiple events, and you can add
one job for the selected events at the same
time by clicking this button.
5
Button for deleting all jobs
You can delete all jobs of the event by
clicking this button.
Figure 4-65 shows the buttons after one event is expanded and Table 4-25 describes these
buttons.