Huawei UPS5000-E Series - Page 58

UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
2 Overview
Issue 11 (2019-12-20)
Copyright © Huawei Technologies Co., Ltd.
48
Component
Model
Function
ports. For details, see the document
delivered with the iBAT.
Parallel cable
5 m/10 m/15 m
Connects UPSs in parallel.
BSC cable
5 m/10 m/15 m/60 m
Transmits bus synchronization
signals in a dual-bus system.
Top air-flow
cabinet
N/A
Used to ensure heat dissipation and
allows the UPS to be installed against
a wall.
Cable entry
cabinet
N/A
If a cable entry cabinet is installed,
cables can be routed in and out from
the bottom of the cabinet.

The ECM extended subrack does not support onsite installation. If you require this optional
component, inform Huawei when you purchase the UPS. Huawei installs it before delivery.

IP21 cannot be configured for the UPS5000-E-300K-SMT and UPS5000-E-200K-FM. If cables are
routed in and out from the top for the UPS5000-E-200K-SM, IP21 cannot be configured.

A cable entry cabinet can be installed only for the non-isolation protection model of
UPS5000-E-200K-FM.