8.
Warranty
8.4 Limited Liability
(1) We shall assume no liability for any special damage, consequential loss or passive loss such as
a loss of expected profit arising from or in connection with our product.
(2) We shall not be liable for any program or control method created by the customer to operate our
product or for the result of such program or control method.
8.5 Conditions of Conformance with Applicable Standards/Regulations, Etc.,
and Applications
(1) If our product is combined with another product or any system, device, etc., used by the
customer, the customer must first check the applicable standards, regulations and/or rules. The
customer is also responsible for confirming that such combination with our product conforms to
the applicable standards, etc. In such a case we will not be liable for the conformance of our
product with the applicable standards, etc.
(2) Our product is for general industrial use. It is not intended or designed for the applications
specified below, which require a high level of safety. Accordingly, as a rule our product cannot be
used in these applications. Contact us if you must use our product for any of these applications:
1) Medical equipment used to maintain, control or otherwise affect human life or physical health.
2) Mechanisms and machinery designed for the purpose of moving or transporting people (For
vehicle, railway facility or air navigation facility)
3) Important safety parts of machinery (Safety device, etc.)
4) Equipment used to handle cultural assets, art or other irreplaceable items
(3) Contact us at the earliest opportunity if our product is to be used in any condition or environment
that differs from what is specified in the catalog or instruction manual.
8.6 Other Items Excluded from Warranty
The price of the product delivered to you does not include expenses associated with programming,
the dispatch of engineers, etc. Accordingly, a separate fee will be charged in the following cases
even during the warranty period:
[1] Guidance for installation/adjustment and witnessing of test operation
[2] Maintenance and inspection
[3] Technical guidance and education on operating/wiring methods, etc.
[4] Technical guidance and education on programming and other items related to programs
To Next Page
Loading...
Need help?
General
