10. For PCON-CB and MCON Controllers (with option: T), it is available to
switch over the setting between effective and ineffective of the high-output
setting in the parameter setting.
(In the setting at delivery, the high output setting is set to effective.)
For MSEL Controller, the high output setting is effective and cannot switch it over to ineffective.
[Refer to an instruction manual for each controller for details]
The performance of weight capacity at each velocity and acceleration/deceleration setting differs
between the high output setting being effective and ineffective. Refer to the applicable
performance specification when the high-output setting is effective or ineffective in 1.2
Specifications.
Controller Parameter Remarks
No.152 High Output Setting
[0: Ineffective, 1: Effective]
No.152 High Output Setting
[0: Ineffective, 1: Effective]
Option T: In high output setting, available to
have high output setting effective.
International Standards Compliances
This actuator complies with the following overseas standard.
Refer to Overseas Standard Compliance Manual (ME0287) for more detailed information.
To Next Page
Loading...
Need help?
General
