1. Speciîš¿cations Check
39
Loadcell
1.5.5 Loadcell (Excluding RCS3-RA15R and RCS3-RA20R)
This is the pressing force detection unit that is used for the pressing operation using force sensor.
This is used by connecting to the actuator
(Note)
corresponding to the pressing operation using
force sensor.
(Note) The connectable actuator differs depending on the rated capacity of the loadcell.
[Specifications]
Item Specification
Loadcell System Strain Gauge
Rated Capacity [N] 200 600 2000 6000 20000
Allowable Oberload
(Note 1)
[%R.C*]
200 200 200 200
Lordcell Accuracy
[%R.C*]
±1.0 ±1.0 ±1.0
Ambient temperature range
[°C]
0 to 40
Dielectric strength voltage [V] DC50
[Installation Drawing]
When installed to RCS2-RA13R
Check the Instruction Manual for details of how to attach and the dimensions.
Caution :
Do not give excess shock (caused by dropping it, etc.) to the loadcell. Failure to follow it
may cause the loadcell to be damaged.
To Next Page
Loading...
Need help?
General
