© Copyright IBM Corp. 2011 Chapter 1. Switch Administration 29
BBI Summary
The BBI is organized at a high level as follows:
Context buttons
—These buttons allow you to select the type of action you wish to
perform. The Configuration button provides access to the configuration elements for
the entire switch. The Statistics button provides access to the switch statistics and
state information. The Dashboard button allows you to display the settings and
operating status of a variety of switch features.
Navigation Window
—This window provides a menu list of switch features and
functions:
• System—this folder provides access to the configuration elements for the entire
switch.
•
Switch Ports
—Configure each of the physical ports on the switch.
•
Port-Based Port Mirroring
—Configure port mirroring behavior.
•
Layer 2
—Configure Layer 2 features for the switch.
•
RMON Menu
—Configure Remote Monitoring features for the switch.
•
Layer 3
—Configure Layer 3 features for the switch.
•
QoS
—Configure Quality of Service features for the switch.
•
Access Control
—Configure Access Control Lists to filter IP packets.
• Virtualization – Configure VMready.
For information on using the BBI, refer to the IBM Networking OS 6.8 BBI Quick
Guide.
To Next Page
Loading...
Need help?
General
