IBM RackSwitch G8000 User Manual

326 RackSwitch G8000: Application Guide
altSwVrrpNewBackup Indicates that the sending agent has
transitioned to “Backup” state.
altSwVrrpAuthFailure Signifies that a packet has been received from
a router whose authentication key or
authentication type conflicts with this router's
authentication key or authentication type.
Implementation of this trap is optional.
altSwLoginFailure Signifies that someone failed to enter a valid
username/password combination.
altSwTempExceedThreshold Signifies that the switch temperature has
exceeded maximum safety limits.
altSwTempReturnThreshold Signifies that the switch temperature has
returned to under maximum safety limits.
altSwStgNewRoot Signifies that the bridge has become the new
root of the STG.
altSwStgTopologyChanged Signifies that there was a STG topology
change.
altSwStgBlockingState An altSwStgBlockingState trap is sent
when port state is changed in blocking state.
altSwCistNewRoot Signifies that the bridge has become the new
root of the CIST.
altSwCistTopologyChanged Signifies that there was a CIST topology
change.
altSwHotlinksMasterUp Signifies that the Master interface is active.
altSwHotlinksMasterDn Signifies that the Master interface is not active.
altSwHotlinksBackupUp Signifies that the Backup interface is active.
altSwHotlinksBackupDn Signifies that the Backup interface is not
active.
altSwHotlinksNone Signifies that there are no active interfaces.
Table 25. IBM N/OS-Supported Enterprise SNMP Traps (continued)
Trap Name Description

IBM RackSwitch G8000 Specifications

General

Brand	IBM
Model	RackSwitch G8000
Category	Network Router
Language	English