Microprocessor
air baffle
Replacing the microprocessor and memory expansion tray
assembly
This information provides instructions on how to replace the microprocessor and
memory expansion tray assembly.
About this task
To replace the microprocessor and memory expansion tray, complete the following
steps:
Procedure
1. Read the safety information and installation guidelines, see “Safety” on page vii
and “Installation guidelines” on page 35.
2. Grasp the tray by the handles, and align the tabs on the sides of the
microprocessor and memory expansion tray with the slots on the chassis wall,
and lower the tray into the server.
Chapter 2. Installing optional devices 131
To Next Page
Loading...
