Tray handle
Microprocessor
and memory
expansion tray
Power supply 2
3. Rotate the tray handle down until the tray is seated firmly and the handle is
locked in place.
4. Slide power supply 2 back into the server.
Replacing the fan cage assembly
This information provides instructions on how to replace the fan cage assembly.
About this task
To replace the fan cage assembly, complete the following steps:
Procedure
1. Make sure that no backplane cables or other cables are in the way before you
install the fan cage assembly.
132 System x3750 M4 Types 8722 and 8733: Installation and Service Guide
To Next Page
Loading...
Need help?
General