RAID cache card
RAID cache
card connector
Release
tab
c. Gently press down on the center of the cache card until it is firmly seated
into the connector.
d. Reconnect the cache card cable to the battery or flash power module in the
battery/flash power module tray.
e. Continue to step 5 on page 279.
4. If you are replacing a cache card on the RAID adapter, complete the following
steps:
a. Align the cache card with the RAID cache card slot on the RAID adapter
and lower it onto the connector.
RAID cache
card connector
RAID cache
card
Retention
bracket
Retention
tab
Adapter
b. Gently press the cache card down until it snaps in place and is securely
seated.
c. Reconnect the battery cable or flash power module cable to the cache card.
d. Align the PCI riser-card assembly with the PCI slot connector on the system
board and align slots on the PCI riser-card assembly with the hinges on the
chassis; then, press down firmly until the riser-card assembly is seated
correctly in the connector on the system board.
e. Insert the adapter into the connector on the riser-card until it is firmly
seated.
f. Reconnect the battery cable or flash power module cable to the battery or
flash power module in the battery/flash power module tray located on top
of the USB/video assembly near the front of the server.
278 System x3750 M4 Types 8722 and 8733: Installation and Service Guide
To Next Page
Loading...
Need help?
General