40000019-00000000 LAN: Ethernet[[arg1]] interface is now active.
Explanation: The IMM Ethernet interface has been enabled.
May also be shown as 4000001900000000 or 0x4000001900000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0025
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
4000001a-00000000 DHCP setting changed to [arg1] by user [arg2].
Explanation: The specified user has changed the DHCP setting of the Integrated Management Module external
network interface.
May also be shown as 4000001a00000000 or 0x4000001a00000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0026
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
4000001b-00000000 Management Controller [arg1]: Configuration restored from a file by user [arg2].
Explanation: The specified user has restored the Integrated Management Module (IMM) configuration from a
previously saved configuration file. Some configuration settings might require that the IMM be restarted before they
take effect.
May also be shown as 4000001b00000000 or 0x4000001b00000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0027
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000019-00000000 • 4000001b-00000000
Appendix D. Integrated management module II (IMM2) error messages 509
To Next Page
Loading...
