Ice vulcan User Manual

Rev AA
Troubleshooting 6-28
ICE Vulcan Service Manual
Error
No.
Error Description
Remedial Actions
Status
E5050
LabelStockAbsent
‘No Labels
Detected’
• The sensor LED must be RED if no labels
present, GREEN if labels are present and
BRIGHT GREEN if the gap between labels
is at the sensor. The sensor LED will be
FLASHING RED if the labels and ribbon is
detected by the sensor.
• You can also view the sensor state at Tools
> Diagnostics > Printhead > Inputs. If the
problem persists, replace the label sensor
or call your local service representative.
The machine will not run until this fault is
resolved. Once resolved and ready, press
the ‘Clear’ button below.
Fault
E5051
IntegraNoPrinthead
‘Incompatible Print-
head’- An
incompatible
printhead has been
detected.
• Power off the machine and replace with
a compatible printhead. Power on to
resume operation.
• If the problem persists, or if you wish to
pur- chase spare parts, please call your
local ser- vice representative for further
support. The machine will not run until this
fault is resolved.
Fault
E5053
IntegraPrintheadNot-
Configured
‘Incompatible Print-
head’- An
incompatible
printhead has been
detected.
• Power off the machine and replace with
a compatible printhead. Power on to
resume operation.
• If the problem persists, or if you wish to
purchase spare parts, please call your local
service representative for further support.
The machine will not run until this fault is
resolved.
Fault

Ice vulcan Specifications

General

Brand	Ice
Model	vulcan
Category	Label Maker
Language	English