Icom IC-R30 - D Radio Access Number (RAN); D User Code (UC)

7
OTHER FUNCTIONS
7-6
■ D.SQL (Digital Squelch) function (Continued)
D Radio Access Number (RAN)
<MODE> NXDN-vn and NXDN-n
The squelch opens only when you receive a NXDN signal that includes a matching RAN.
• Selectable codes: 0 ~ 63
1. Push [QUICK].
2. Select “D.SQL.”
(Rotate [DIAL] to select it, and then push [ENTER].)
3. Select “RAN (1).”
4. Select a code.
L “RAN” is displayed under the receive mode.
D User Code (UC)
<MODE> DCR
The squelch opens only when you receive a DCR signal that includes a matching UC.
• Selectable codes: 1 ~ 511
1. Push [QUICK].
2. Select “D.SQL.”
(Rotate [DIAL] to select it, and then push [ENTER].)
3. Select “UC (1).”
4. Select a code.
L “UC” is displayed under the receive mode.