7
OTHER FUNCTIONS
7-22
■ USB driver installation (Continued)
D Installation
L These instructions are based on Microsoft
®
Windows
®
10.
NOTE:
• NEVER connect the USB cable between the receiver and the PC until AFTER the
USB driver has been installed.
• This USB driver is not supported by the automatic recognition system.
1. Confirm that the radio and PC are not connected.
2. Double-click the USB driver installer in the extracted folder.
• If you want to install to the 32 bit version OS, double-click “CP210xVCPInstaller_x86.
exe.”
• If you want to install to the 64 bit version OS, double-click “CP210xVCPInstaller_x64.
exe.”
L When the “User Account Control” dialog is displayed, click <Yes>.
3. When the language select window is displayed, click <OK>.
Click
4. When the install window is displayed, click <Next>.
Click
(Continued on the next page.)
To Next Page
Loading...
