Icom IC-R30 - D Changing the GPS Memory or Alarm; D Setting the Display Type (MAIN;SUB)

5
GPS OPERATION
5-11
■ Checking your GPS location (Continued)
D Setting the display type (MAIN/SUB)
You can select the display type for the “GPS POSITION” screen.
1. Display the “GPS POSITION” screen.
2. Rotate [DIAL] to select the “RX” screen.
3. Push [QUICK].
4. Select “Display Select(MAIN/SUB).”
(Rotate [DIAL] to select it, then push [ENTER].)
5. Select the display type.
D Changing the GPS Memory or Alarm
You can select the display type for the “GPS POSITION” screen.
1. Displays the “GPS POSITION” screen.
2. Rotate [DIAL] to select the “MEM” screen or “ALM” screen, then push [QUICK].
3. Select “GPS Memory Select,” or select “Alarm Select.”
4. Select the GPS Memory or GPS Alarm to display on the GPS POSITION screen.
L Adding or editing a GPS Memory: p. 5-15
L Setting the GPS Alarm: p. 5-22
Latest (MAIN/SUB): The last received station’s position data is displayed.
MAIN: The position data of the station received on the MAIN band is
displayed.
SUB: The position data of the station received on the SUB band is
displayed.
MEM screen ALM screen