Icom IC-R30 - D Confirming the Port Number

7
OTHER FUNCTIONS
7-24
After the driver installation has been completed, conrm the port connection and port
number.
1. Click the folder icon on the taskbar.
2. Right-click “This PC,” and then click “Properties.”
q Right-click
w Click
3. Click [Device Manager].
Click
• The “Device Manager” screen is displayed.
4. Double-click “Ports (COM & LPT)” on the “Device Manager” screen.
Double-click
• The screen is an example of the USB serial COM port number “3.”
L Depending on the PC environment, the COM port number may differ.
L If “!” or “×” is displayed on the “Device Manager” screen, the driver may not be properly
installed. In such a case, rst uninstall the USB driver, then reinstall it.
■ USB driver installation (Continued)
D Conrming the port number