Icom IC-R30 - Inserting a Blank Channel

4
MEMORY OPERATION
4-11
■ Inserting a blank channel
You can insert a blank channel between 2 Memory channels.
This function is convenient to organize your memory channels.
Example: Inserting a blank channel between channel 5 and 6.
1. Push [MW].
2. Select “Manage Memory.”
(Rotate [DIAL] to select it, and then push [ENTER].)
3. Select the group.
4. Select the channel.
5. Push [QUICK].
6. Select “Insert.”
• Beeps sound and a blank channel is inserted above the selected channel.
L Channels other than the one you moved will move up.
L If you select channel 99 in step 4, 99th channel will be deleted.
(A conrmation dialog will appear.)
TIP: Inserting a blank group
On the Memory Group screen, select a group
and push [QUICK] then select “Insert Group.”
• A blank group is inserted above the selected group.