Icom IC-R30 - GPS OPERATION; Before starting GPS operation; Checking your GPS location; GPS Memory

5-1
GPS OPERATION
Section 5
■ GPS operation features............................................... 5-2
■ Before starting GPS operation .................................... 5-2
D Checking the GPS signal ........................................ 5-2
■ GPS format types ........................................................ 5-3
■ Checking your GPS location ....................................... 5-4
D Displaying Position Data ......................................... 5-4
D GPS POSITION screens and their meanings ......... 5-5
D About the RX screen ............................................... 5-7
D About the Grid Locator .......................................... 5-10
D About the Course .................................................. 5-10
D Setting the display type (MAIN/SUB) .....................5-11
D Changing the GPS Memory or Alarm.....................5-11
D Changing the Compass Direction ......................... 5-12
D Saving your own or a received station’s location .. 5-13
■ Checking GPS information (Sky view screen) .......... 5-14
■ GPS Memory............................................................. 5-15
D Adding a GPS Memory ......................................... 5-15
D Entering the GPS Memory group name ................ 5-19
D Deleting GPS Memory .......................................... 5-20
D Rearranging the display order of the GPS data .... 5-21
■ GPS Alarm ................................................................ 5-22
D Setting the GPS Alarm function to All Memories ... 5-23
■ GPS Logger function ................................................. 5-24
D GPS Logger operating outline............................... 5-24
D Conrming the GPS Logger function .................... 5-25
D Setting the GPS record interval ............................ 5-25
D Setting the GPS record sentence ......................... 5-26
D Viewing the log data on a PC ................................ 5-27
D The <<GPS Logger Only>> mode ........................ 5-28
D <<GPS Logger Only>> outline .............................. 5-28
D Setting the <<GPS Logger Only>> mode ............. 5-28
NOTE: Before using the GPS function, read the “GPS OPERATION”
section in the BASIC MANUAL.