3
RECORDING AND PLAYING BACK
3-2
■ Recording
The microSD and microSDHC cards are not supplied by Icom. User supplied.
D Starting recording
z Push [zREC].
• “Recording started...” is briey displayed.
TIP:
• “
” is displayed during recording.
• “
” is displayed while recording is paused.
• If a single band display is selected, only the audio
signal received on the band is recorded, even when the
“REC Operation” item is set to “A/B Link.”
• The recording continues until you push [zREC], or the
free space on the microSD card has run out.
• When the recording le’s content reaches 2 GB, the
receiver continues to record, but to a new le.
D Stopping recording
1. Push [zREC] again.
• A conrmation dialog is displayed.
2. Select “YES,” and then push [ENTER].
• “Recording stopped.” is briey displayed.
[zREC]
TIP:
• As the default setting, the recording is paused while the squelch is closed, and
resumes when a signal is received. But you can set to continue recording even while
no signal is received.
(p. 3-5)
([MENU] > RX Recorder > Recorder Set > RX REC Condition)
• You can select to record the received audio from only the main band or both the main and
sub bands. (p. 3-5)
([MENU] > RX Recorder > Recorder Set > REC Operation)