Icom IC-R30 - D Selecting with the Keypad; D Selecting with [DIAL]; Selecting a Memory Channel

4
MEMORY OPERATION
4-4
■ Selecting a memory channel
D Selecting with [DIAL]
1. Push [VFO/MR] to select the Memory mode.
2. Push [BAND] to select a group.
3. Rotate [DIAL] to select a Memory channel.
D Selecting with the keypad
1. Push [VFO/MR] to select a Memory mode.
2. Push [BAND] to select a group.
3. Push [F-INP] to select the Memory channel.
• The selected group and “-” (hyphen) are displayed.
4. Push the numeric keys to enter the desired memory channel number.
• When you entered two digits, a beep sounds and the channel is selected.
L If the channel number is one digit, push [ENTER] after you entered the channel
number.
Group 00 Channel 10 Contents of channel 10