6
MENU SCREEN
6-9
■ GPS
GPS Information
[MENU] > GPS > GPS Information
Displays the GPS satellite direction, elevation, satellite number, and receiving status.
See page 5-14 for details.
GPS Position
[MENU] > GPS > GPS Position
Displays position data shown below. See page 5-4 for details.
L Rotate [DIAL] to change between MY, RX, MEM, and ALM screen.
• MY: My position
• RX: Received position
• MEM: GPS Memory position
• ALM: GPS Alarm position
GPS Memory
[MENU] > GPS > GPS Memory
You can save maximum of 300 position data, those come with GPS position or RX
history. See page 5-15 for details.
Alarm Select (Default: OFF)
[MENU] > GPS > GPS Alarm > Alarm Select
Select the target positions for the GPS Alarm function.
This function sounds alarm beeps when a target is in the active range.
See page 5-22 for details.
• OFF: Turns OFF the function.
• RX: The GPS Alarm sounds when a target (the last received position)
enters in your active alarm range.
• Group: The GPS Alarm sounds when a target (positions in the GPS Memory,
or in the selected GPS Memory Group) enters in your active alarm
range.
• Memory: The GPS Alarm sounds when a target (the entered position in the
GPS Memory) enters in the active alarm range.
To Next Page
Loading...
Need help?
General
