7
OTHER FUNCTIONS
7-25
■ Cloning function
The receiver has a data cloning capability. This function is useful when you want to copy
all of the entered contents from one IC-R30 to another. You can also clone with a PC,
using the optional CS-R30 software.
Receiver-to-Receiver cloning using a microSD card (p. 7-26)
NOTE: If your PC does not have a microSD card slot, connect a memory card reader
(user supplied) to use the microSD card. Refer to the CS-R30 Instruction manual.
To a USB port
Supplied USB cable
IC-R30 is recognized
as a USB ash drive
Master Sub
Cloning from a PC using a microSD card (p. 7-28)
Cloning from a PC using an optional cloning cable
By using the CS-R30 cloning software and the supplied USB cable, you can clone with
a PC.
CS-R30
Supplied USB cable
To a USB port
CS-R30
To Next Page
Loading...
