Icom IC-R30 - D All Reset

7
OTHER FUNCTIONS
7-20
■ Resetting (Continued)
D All reset
NOTE:
An All reset clears all data and returns all settings to their factory defaults. Save memory
channel contents, setting status, and so on, onto an SD card before doing an All reset.
So you will need to reenter your Memories, list, and operating settings.
The Bluetooth paring list is not cleared by an All reset.
[MENU] > Others > Reset > All Reset
1. Push [MENU].
2. Select “All Reset” in the “Others” menu.
(Rotate [DIAL] to select it, and then push [ENTER].)
• A conrmation dialog appears.
3. Select “NEXT,” then push [ENTER].
• Another conrmation dialog is displayed.
4. Select “YES,” then push [ENTER].
• After “ALL RESET” is displayed, the IC-R30 will automatically restart.