6
MENU SCREEN
6-22
■ Function (Continued)
USB Serialport Function (Default: CI-V (Echo Back OFF))
[MENU] > Function > USB Serialport Function
Set the Serialport function for the USB connection to data device, PC and so on.
• CI-V (Echo Back OFF): The CI-V command is input or output through the USB port.
Does not send back the CI-V command input from the USB
port.
• CI-V (Echo Back ON): The CI-V command is input or output through the USB port.
Sends back the CI-V command input from the USB port.
• D-STAR Data: The D-STAR data is output to the USB port.
• GPS Out: The GPS information from the internal GPS receiver is
output to the USB port.
■ Display
Backlight (Default: Auto (DC IN: ON))
[MENU] > Display > Backlight
Select an option for the receiver backlight.
• OFF: The backlight does not light.
• ON: The backlight lights continuously.
• Auto: The backlight lights when you push a key or rotate [DIAL], and
goes out after the set period of time in the Backlight Timer.
• Auto (DC IN: ON): The backlight lights when you push a key or rotate [DIAL], and
goes out* after the set period of time in the Backlight Timer.
* When using the GPS logger, or an external DC power source is
connected, “Auto (DC IN: ON)” is automatically selected.
Backlight Timer (Default: 5sec)
[MENU] > Display > Backlight Timer
Set the Backlight Timer to 5 or 10 seconds. Depending on the Backlight option, the
backlight lights for this set period of time, and then automatically goes out.
LCD Dimmer (Default: Bright)
[MENU] > Display > LCD Dimmer
Set the LCD backlight brightness level.
• Bright: The LCD backlight brightness level is bright.
• Dark: The LCD backlight brightness level is dim.
To Next Page
Loading...
