Icom IC-R30 - Copying Memory Contents to the VFO

4
MEMORY OPERATION
4-8
■ Copying Memory contents to the VFO
You can copy the Memory contents to the VFO.
Example: Copying the contents of channel 00 in group 00 to the VFO.
1. Push [VFO/MR] to select the Memory mode.
2. Rotate [DIAL] to select the channel.
• The selected Memory channel number blinks.
3. Push [MW].
4. Select “Copy to VFO.”
(Rotate [DIAL] to select it, and then push [ENTER].)
• A conrmation dialog appears.
5. Select “Yes.”
• Beeps sound and the selected memory contents are copied to the VFO, then returns to
the VFO mode screen.