Icom IC-R30 - Page 138

7
OTHER FUNCTIONS
7-27
Step 2. Remove the microSD card from the master receiver, then insert it into
the sub receiver.
1. Hold down the master receiver’s [ ] to turn it OFF.
2. Remove the microSD card from the master
receiver.
3. Insert the microSD card into the sub receiver, then
hold down the sub receiver’s [
] to turn it ON.
■ Cloning function
D Receiver-to-Receiver cloning using a microSD card (Continued)
TIP: The setting data are saved in the “icf” le format that is used in the CS-R30
cloning software. When the saved data on a card is copied to a PC, you can edit it with
the cloning software.
Step 3. Loading the setting data into the sub receiver.
[MENU] > SD Card > Load Setting
1. Push [MENU].
2. Select “Load Setting,” in the “SD Card” menu.
(Rotate [DIAL] to select it, and then push [ENTER].)
3. Select a file to load.
L A conrmation window appears.
4. Select “YES.”
• Starts the le check. After checking, starts settings data loading.
• After loading, “COMPLETED! Restart the IC-R30.” is displayed.
5. Restart the receiver.
Master Sub