Icom IC-R30 - Page 149

7
OTHER FUNCTIONS
7-38
• Tone squelch frequency setting
Command: 1B 01
q
*
ew
00XX
XX
Fixed: 0 Fixed: 0
100 Hz digit: 0 ~ 2 10 Hz digit: 0 ~ 9 1 Hz digit: 0 ~ 9 0.1 Hz digit: 0 ~ 9
*Not necessary when setting a frequency.
See page 7-3 for the tone frequency list.
• DTCS code and polarity setting
Command : 1B 02
q
0XXXX
we
X
rt
XX X0
10H zdigit：0, 5
(according to the 100 Hz digit)
1 Hz digit：0 (Fixed)
1 kHz digit：0~9
100 Hz digit：0,2 , 5, 7
100 kHz digit：0~9
10 kHz digit：0~9
10 MHz digit：0~9
1 MHz digit：0~9
1000 MHz digit：0 (Fixed)
100 MHz digit：0~4
00XXXX
q※ we
固定:0 固定:0 100Hz桁 10Hz桁 1Hz桁 0.1Hz桁
XXX0
qw
1kHz桁:0〜3 100Hz桁：0〜9 10Hz桁：0〜9 1Hz桁:0 (固定)
0X0XXX
qwe
0 (fixed) First digit: 0 ~ 7 Second digit: 0 ~ 7 Third digit: 0 ~ 7 0 (fixed)
0: Normal
1: Reverse
See page 7-3 for the DTCS code list.
• NAC (P25) setting
Command : 1B 03
q w e
Once position: 0 ~ F
0 (Fixed)
10th position: 0 ~ F
0 (Fixed)
100th posiiton: 0 ~ F
0 (Fixed)
0 X
0 X 0 X
■ CI-V information
D Commands (Continued)