6
MENU SCREEN
6-17
■ SPEECH (Continued)
MODE SPEECH (Default: OFF)
[MENU] > SPEECH > MODE SPEECH
Turn the Receive Mode Speech function ON or OFF.
When this function is ON, the selected receive mode is announced.
L While the VFO scanning, the receive mode is announced when you change the mode.
• OFF: The selected receive mode is not announced.
• ON: The selected receive mode is announced.
SPEECH Language (Default: English)
[MENU] > SPEECH > SPEECH Language
Set the speech language to English or Japanese.
Alphabet (Default: Normal)
[MENU] > SPEECH > Alphabet
Select either “Normal” or “Phonetic Code” to announce the alphabet characters.
• Normal: Normal code is used.
(Example: A as eh, B as bee)
• Phonetic Code: The Phonetic code is used.
(Example: A as Alfa, B as Bravo)
SPEECH Speed (Default: Fast)
[MENU] > SPEECH > SPEECH Speed
Set the speech speed to Slow or Fast.
SPEECH Level (Default: 5)
[MENU] > SPEECH > SPEECH Level
Adjust the voice synthesizer volume level to between 0 (OFF), 1 (minimum), and
9 (maximum).
To Next Page
Loading...
