Icom ID-4100A

6
USING A microSD CARD
6-3
You can save the Memory channels, Menu screen
item settings, and repeater lists on a microSD card.
Saving data settings on a card enables you to easily
restore the transceiver to its previous settings, even if
you perform an All Reset.
You can save the setting data as a new le or to
overwrite an older le.
To save as a new le
SD Card > Save Setting
1. Push [MENU].
2. Rotate [DIAL] to select “SD Card,” then push [ï].
3. Select “Save Setting,” then push [ï].
4. Select “<<New File>>,” then push [ï].
• Displays the FILE NAME screen.
L The le name is automatically named in the following
manner: Setyyyymmdd_xx (yyyy: Year, mm: month,
dd: day, xx: serial number)
Example: If a second le is saved on April 1, 2017,
the le is named “Set20170401_02.”
L To change the le name, see “Save with a different
le name.” (p. 6-4)
5. Push [ï].
• The conrmation dialog “Save le?” is displayed.
6. Select <YES>, then push [ï].
• Saves the data settings.
L While saving, a progress bar is displayed, then
returns to the SD CARD screen after the saving is
completed.
7. Push [MENU].
• Returns to the standby screen.
Saving the setting data onto a microSD card
TIP: The setting data are saved in the “icf” le
format that is used in the CS-4100 cloning
software. When the saved data on a card is copied
to a PC, you can edit it with the cloning software.
To overwrite a le
To overwrite a le, select the le to be overwritten in
step 4 to the left.
Previous view