Icom ID-4100A

10
OTHER FUNCTIONS
10-14
Transceiver-to-Transceiver cloning using a
microSD card (p. 10-15)
Master
Sub
Cloning from a PC using a microSD card (p. 10-17,
CS-4100 Instruction manual)
To the memory
card reader
To the memory
card slot
L If your PC does not have a microSD card slot,
connect a memory card reader (user supplied) to
use the microSD card.
The ID-4100A/E has a data cloning capability. This
function is useful when you want to copy all of the
entered contents from one ID-4100A/E to another.
Cloning can also be done with a PC.
Cloning function
Cloning from a PC using an optional cloning cable
(CS-4100 Instruction manual)
By using the CS-4100 cloning software and an
optional cloning cable, cloning can be done with a PC.
See the CS-4100 instruction manual that can be
downloaded from the Icom website.
http://www.icom.co.jp/world/support/
To the
[DATA] jack
To the
speaker jack
OPC-478UC
(Option)
To the
USB port
To the
USB port
OPC-2350LU
(Option)
IMPORTANT: When using the OPC-2350LU, set
the “DV Data TX” setting of the transceiver to “PTT,”
before reading or writing setting data. Otherwise,
when a PC input data through the [DATA] jack, the
transceiver automatically transmits it.
(MENU > DV Set > DV Data TX)
Previous view