Icom ID-4100A

5
GPS OPERATION
5-10
D Changing the Compass Direction
You can change the compass direction between
Heading Up, North Up, and South Up.
Checking your location (Continued)
Heading Up North Up South Up
1. Push [QUICK].
2. Rotate [DIAL] to select “GPS Position,” then push
[ï].
• Displays the GPS POSITION screen.
3. Push [QUICK].
4. Select “Compass Direction,” then push [ï].
5. Select the compass direction.
• Heading Up: The compass always points to your
heading course direction.
• North Up: The top is always north.
• South Up: The top is always south.
When you select “South Up.”
D Saving your own or a received position
data
You can save the position data of your station from
wherever you are, and also the position data of the
caller station.
The GPS Memory has a total of 300 channels, and
the channels can be assigned into one of 27 banks, A
~ Z, and (No Group).
1. Push [QUICK].
2. Rotate [DIAL] to select “GPS Position,” then push
[ï].
• Displays the GPS POSITION screen.
3. Select the screen that you want to save.
L To save your own position data: MY screen
L To save a received position data: RX screen
4. Push [QUICK].
5. Select “Add To GPS Memory,” then push [ï].
L See pages 5-27 ~ 5-29 for entering details.
6. Select “<<Add Write>>,” then push [ï].
• The conrmation dialog “Add write?” is displayed.
L To select the destination group to be saved, select
“GROUP.”
7. Select <YES>, then push [ï].
• Saves the data in the GPS memory, then returns to
the GPS POSITION screen.
8. Push [].
• Returns to the standby screen.
TIP: The position data is saved in the selected
group with the "GROUP" item.
(GPS > GPS memory)
Previous view