12
Bluetooth
®
OPERATION
12-3
You can connect the optional Bluetooth headset to the
transceiver.
Step 1. Selecting the pairing mode of the headset.
See the instruction manual of the headset to select
the pairing mode.
Step 2. Searching for the headset (Transceiver)
Bluetooth Set > Pairing/Connect
1. Push [MENU].
2. Rotate [DIAL] to select “Bluetooth Set,” then push
[ï].
3. Select “Pairing/Connect,” then push [ï].
4. Select “Device Search,” then push [ï].
5. Select “Search Headset,” then push [ï].
• Displays the usable headsets in the pairing list.
(Example: ICOM BT-002)
6. Select “ICOM BT-002,” then push [ï].
• The conrmation dialog “Connect?” is displayed.
7. Select <YES>, then push [ï].
• Connects to the headset.
• After the connecting to the headset, “
” is displayed
in the pairing list.
Pairing List
Headset icon
Device name
(“ICOM” indicate the Icom headset.)
Displayed while connecting
8. Push [MENU].
• Returns to the standby screen.
L While connected to a Bluetooth device, the Bluetooth
icon is displayed.
Displayed
Connecting to a Bluetooth
®
headset
TIP:
• When you turn ON the transceiver with “Auto
Connect” set to ON, the transceiver automatically
connects to the last paired device. (Default: ON)
(Bluetooth Set > Auto Connect)
After connecting,
the following
dialog
is displayed.
• When the transceiver cannot nd a connectable
headset, and “No Device Found” is displayed on
the screen, push [QUICK], then select “Re-search”
to search again for a headset.
Push [QUICK]
To Next Page
Loading...
